Different Types of Batteries and their Maintenance
Imagine running your car without a battery, or your recreational vehicle or the motor boat. Or imagine uninterrupted power supply by an inverter without the batteries. We simply cannot live our daily lives in a smooth way without batteries. In fact our reliability on batteries has increased to a greater extent. If the life of a battery is reduced or it cannot supply power till its complete capacity, we face huge difficulties. For this we need to have basic information about batteries and how to make them work longer and efficiently. However the whole jargon related to batteries and its various types can sound gibberish to most of us. But it does not hurt to have a little bit of knowledge about what are the different types of batteries and for what purpose are they used.
General information on battery types
A battery is like a piggy bank from which we take out energy but must remember to put back by recharging them. The battery most often used is a lead acid battery. There are further two types of lead acid batteries, namely starting or cranking battery and deep cycle battery. Cranking batteries give out quick bursts of energy and are ideal to be used for starting engines in vehicles. On the other hand, deep cycle batteries are for long term delivery of energy. They are typically used for vehicles like golf carts and marine. They do not provide instant energy like the starting batteries instead deliver energy for a long term. These deep cycle batteries can withstand many discharge cycles owing to the thick plates that the batteries have. However, to get the best uses out of these batteries you need to choose the right deep cycle batteries Melbourne provider. The lead acid batteries have a few versions too such as gel cell, wet or flooded gel and AGM or absorbed glass mat.
Maintenance of batteries
Batteries will work better and longer if they are regularly maintained. Just like the instance given above, the battery, as a piggy bank of energy, needs to be regularly replenished for it to serve its purpose. The fluid levels for serviceable batteries need to be diligently checked. The fluid used must preferably be distilled mineral water that is free of impurities, which could otherwise contaminate the cells within the battery. The battery itself can be cleaned using a solution of baking soda with water. The cable connection also needs to be checked as well as cleaned.
This is important because a number of problems related to batteries are due to lose cable connections or dirty cables. Corrosion of cables on top post batteries is another maintenance point that is usually forgotten about. The corrosion is usually caused by the condensation of the battery gases on the metal cable parts. A silicone sealer can be used to prevent this corrosion.
Batteries are important for you to use your vehicles and various other gadgets and must thus be used and maintained carefully. Safety of oneself and the battery must be given great significance. Secondly, batteries must be regularly inspected and maintained, especially in summer months or hot weather. The recharge of the batteries must also be done immediately post a discharge. The tutorials and service guidance must also be read properly to extend the performance and life of the battery.